How to detect the technical indicators of precipitation barium sulfate in alum manufacturing equipment。-房产-www.liusuanlvshebei.com

China will have strict standards for every material used in production. The accumulation of barium sulfate in the production process of precipitated barium sulfate must be tested at every stage to ensure the quality of the product. So, what is the testing process? especially:

Particle diameter distribution: This is determined by the particle distribution of the GSL-101b i laser.

Uniform menstruation: The distribution of grain diameter primarily comes from uniform values.

Surface area ratio: obtained through the conversion of uniform particle diameter, usually indicated in relative area units of 1g powder.

325 Mesh residue: This detection method primarily involves filtering 1000 grams of sample precipitated barium sulfate into the endosulfan mesh of 325 Mesh, and the residue ratio calculated from this is the residue.

False specific gravity: This detection method involves placing 50g of the sample into a 100cc measuring cylinder and obtaining 150 values from a 5cm height drop.

Whiteness: measured at standard values.

PH Value: A precise PHS-3C instrument used for identifying pH values.

Oil absorption: Use JLS-K5101 method to add flaxseed titration during the inspection process until it becomes larger, and then record the data. If you have any other questions, please refer to the official website of Barium Sulfate Precipitation or contact us directly.